套筒式聲測管安裝時常見問題

套筒式聲測管安裝時常見問題

Common problems in installation of sleeve type acoustic pipe

今天我們把套筒式聲測管在使用過程中會遇到的問題和會發生的故障從兩個方面說明一下。

Today, we will explain the problems and faults that will occur in the use of sleeve acoustic tube from two aspects.

點：就是套筒式測管的接頭或者是管口或者是管底發生密封不嚴的情況,那么在施工的過程中它就會發生漏漿造成堵塞的情況,這時候要檢查密封情況，看不是工人在焊接過程中有漏焊的情況，找到漏焊點進行補焊就可以了。

The first point: if the joint or nozzle or bottom of the sleeve type measuring pipe is not tightly sealed, it will be blocked by slurry leakage during construction. At this time, check the sealing to see if there is missing welding during welding, and find the missing welding point for repair welding.

第二點是它在安裝時接頭發生錯位或者是變形,這時候大家就需要知道這是因?yàn)檫x用的材料過薄引起的,這種情況就要和廠家協商調換厚壁聲測管，套筒式聲測管建議用1.8mm以上的。

The second point is that the joint is misaligned or deformed during installation. At this time, we need to know that this is caused by the selected material is too thin. In this case, we need to negotiate with the manufacturer to replace the thick wall acoustic pipe. It is recommended to use a sleeve acoustic pipe of more than 1.8mm.